Introduction to rubber gloves.
Rubber gloves are one of the gloves, which are different from ordinary gloves and are made of latex. Can be used as a home, industry, medical, beauty and other industries, is a necessary hand protection supplies. The use of natural latex, with other fine additives processed into latex gloves, products after special surface treatment, comfortable to wear, in industrial and agricultural production, medical, daily life have a wide range of applications. Rubber gloves are divided into: glossy rubber gloves, hemp rubber gloves, striped rubber gloves, transparent rubber gloves and powder-free latex gloves five, latex gloves according to the use of five types: disposable latex gloves, household latex gloves, industrial latex gloves, medical latex gloves, etc.; 08mm-0.09mm; Colors: beige, light yellow; Main ingredients: natural latex; packaging: 100pcs/pack (vacuum packaging); Specs: XS, S, M, L, XL; 100 natural latex-made latex gloves with high dexity, comfortable wearing and high strength. The pinhole rate is low and has excellent closed protection characteristics. Widely used in electronics, food, medicine and photoelectronics and other related industries.
Introduction to the rubber glove process.
The rubber is first sliced by the gel machine, and the sol cylinder is sliced and mixed with gasoline. The sol is then emulsified and modulated and pumped into the latex intermediate tank. The rubber solution dissolved in gasoline is fed from the top of the distillation tower and distilled by steam heating, the light-form gasoline is heated into the gas phase, and the gasoline gas is mixed and cooled by cold water in the oil and gas cooler. Oil-water mixture to oil-water separator, oil-water layering. The upper gasoline is recovered, the lower water is pumped to the cool water tower for cooling, and then the distillation tower is cooled after the gas gasoline; the distillation tower latex is stirred according to its own pressure latex mixing tank, modulation is separated to the centrifuge glove raw material latex, and then after color adjustment, filtration to be used.
Glove model first by acid-base cleaning, water cleaning, washing model first immersed in hot water heating and then to immersion coagulant and drying for immersion glue. Dip the glue after the oven preliminary drying, fiber inner sleeve, hot water and then sent to the oven vulcanization, drying molding. Gloves after release of inflatable inspection, low temperature molding, medium temperature drying, washing, dehydration, drying and then packaging to the finished warehouse.
Other suggestions.
Plastic gloves after each use of clean drying do not sun the best gloves put some talc or starch has been anti-stick also convenient next time easy to wear especially summer do not burst the sun.